time_sink_f.h

Go to the documentation of this file.

/* -*- c++ -*- */
/*
 * Copyright 2011-2013,2015 Free Software Foundation, Inc.
 *
 * This file is part of GNU Radio
 *
 * SPDX-License-Identifier: GPL-3.0-or-later
 *
 */
 
#ifndef INCLUDED_QTGUI_TIME_SINK_F_H
#define INCLUDED_QTGUI_TIME_SINK_F_H
 
#include <gnuradio/qtgui/api.h>
#include <gnuradio/qtgui/trigger_mode.h>
#include <gnuradio/sync_block.h>
#include <qapplication.h>
 
namespace gr {
namespace qtgui {
 
/*!
 * \brief A graphical sink to display multiple signals in time.
 * \ingroup instrumentation_blk
 * \ingroup qtgui_blk
 *
 * \details
 * This is a QT-based graphical sink the takes set of a float streams
 * and plots them in the time domain. Each signal is plotted with a
 * different color, and the \a set_title and \a set_color functions
 * can be used to change the label and color for a given input number.
 *
 * The sink supports plotting streaming float data or
 * messages. The message port is named "in". The two modes cannot
 * be used simultaneously, and \p nconnections should be set to 0
 * when using the message mode. GRC handles this issue by
 * providing the "Float Message" type that removes the streaming
 * port(s).
 *
 * This sink can plot messages that contain either uniform vectors
 * of float 32 values (pmt::is_f32vector) or PDUs where the data
 * is a uniform vector of float 32 values.
 */
class QTGUI_API time_sink_f : virtual public sync_block
{
public:
    // gr::qtgui::time_sink_f::sptr
    typedef std::shared_ptr<time_sink_f> sptr;
 
    /*!
     * \brief Build floating point time sink
     *
     * \param size number of points to plot at once
     * \param samp_rate sample rate (used to set x-axis labels)
     * \param name title for the plot
     * \param nconnections number of signals connected to sink
     * \param parent a QWidget parent object, if any
     */
    static sptr make(int size,
                     double samp_rate,
                     const std::string& name,
                     unsigned int nconnections = 1,
                     QWidget* parent = NULL);
 
    virtual void exec_() = 0;
    virtual QWidget* qwidget() = 0;
 
    virtual void set_y_axis(double min, double max) = 0;
    virtual void set_y_label(const std::string& label, const std::string& unit = "") = 0;
    virtual void set_update_time(double t) = 0;
    virtual void set_title(const std::string& title) = 0;
    virtual void set_line_label(unsigned int which, const std::string& line) = 0;
    virtual void set_line_color(unsigned int which, const std::string& color) = 0;
    virtual void set_line_width(unsigned int which, int width) = 0;
    virtual void set_line_style(unsigned int which, int style) = 0;
    virtual void set_line_marker(unsigned int which, int marker) = 0;
    virtual void set_nsamps(const int newsize) = 0;
    virtual void set_samp_rate(const double samp_rate) = 0;
    virtual void set_line_alpha(unsigned int which, double alpha) = 0;
 
    /*!
     * Set up a trigger for the sink to know when to start
     * plotting. Useful to isolate events and avoid noise.
     *
     * The trigger modes are Free, Auto, Normal, and Tag (see
     * gr::qtgui::trigger_mode). The first three are like a normal
     * oscope trigger function. Free means free running with no
     * trigger, auto will trigger if the trigger event is seen, but
     * will still plot otherwise, and normal will hold until the
     * trigger event is observed. The Tag trigger mode allows us to
     * trigger off a specific stream tag. The tag trigger is based
     * only on the name of the tag, so when a tag of the given name
     * is seen, the trigger is activated.
     *
     * In auto and normal mode, we look for the slope of the of the
     * signal. Given a gr::qtgui::trigger_slope as either Positive
     * or Negative, if the value between two samples moves in the
     * given direction (x[1] > x[0] for Positive or x[1] < x[0] for
     * Negative), then the trigger is activated.
     *
     * The \p delay value is specified in time based off the sample
     * rate. If the sample rate of the block is set to 1, the delay
     * is then also the sample number offset. This is the offset
     * from the left-hand y-axis of the plot. It delays the signal
     * to show the trigger event at the given delay along with some
     * portion of the signal before the event. The delay must be
     * within 0 - t_max where t_max is the maximum amount of time
     * displayed on the time plot.
     *
     * \param mode The trigger_mode: free, auto, normal, or tag.
     * \param slope The trigger_slope: positive or negative. Only
     *              used for auto and normal modes.
     * \param level The magnitude of the trigger even for auto or normal modes.
     * \param delay The delay (in units of time) for where the trigger happens.
     * \param channel Which input channel to use for the trigger events.
     * \param tag_key The name (as a string) of the tag to trigger off
     *                 of if using the tag mode.
     */
    virtual void set_trigger_mode(trigger_mode mode,
                                  trigger_slope slope,
                                  float level,
                                  float delay,
                                  int channel,
                                  const std::string& tag_key = "") = 0;
 
    virtual std::string title() = 0;
    virtual std::string line_label(unsigned int which) = 0;
    virtual std::string line_color(unsigned int which) = 0;
    virtual int line_width(unsigned int which) = 0;
    virtual int line_style(unsigned int which) = 0;
    virtual int line_marker(unsigned int which) = 0;
    virtual double line_alpha(unsigned int which) = 0;
 
    virtual void set_size(int width, int height) = 0;
 
    virtual void enable_menu(bool en = true) = 0;
    virtual void enable_grid(bool en = true) = 0;
    virtual void enable_autoscale(bool en = true) = 0;
    virtual void enable_stem_plot(bool en = true) = 0;
    virtual void enable_semilogx(bool en = true) = 0;
    virtual void enable_semilogy(bool en = true) = 0;
    virtual void enable_control_panel(bool en = true) = 0;
    virtual void enable_tags(unsigned int which, bool en) = 0;
    virtual void enable_tags(bool en) = 0;
    virtual void enable_axis_labels(bool en = true) = 0;
    virtual void disable_legend() = 0;
 
    virtual int nsamps() const = 0;
    virtual void reset() = 0;
 
    QApplication* d_qApplication;
};
 
} /* namespace qtgui */
} /* namespace gr */
 
#endif /* INCLUDED_QTGUI_TIME_SINK_F_H */