gnuradio.audio

Blocks to connect to audio sources (mic-in) and sinks (speaker-out) ports on a computer.

The underlying hardware driver is system and OS dependent and this module should automatically discover the correct one to use.

gnuradio.audio.source(int sampling_rate, std::string const device_name, bool ok_to_block=True) → source_sptr

Creates a source from an audio device.

Constructor Specific Documentation:

Creates a source from an audio device at a specified sample_rate. The specific audio device to use can be specified as the device_name parameter. Typical choices are:

  • pulse, hw:0,0, plughw:0,0, surround51, /dev/dsp
Parameters:
  • sampling_rate –
  • device_name –
  • ok_to_block –
source_sptr.active_thread_priority(source_sptr self) → int
source_sptr.declare_sample_delay(source_sptr self, int which, int delay)

declare_sample_delay(source_sptr self, unsigned int delay)

source_sptr.message_subscribers(source_sptr self, swig_int_ptr which_port) → swig_int_ptr
source_sptr.min_noutput_items(source_sptr self) → int
source_sptr.pc_input_buffers_full_avg(source_sptr self, int which) → float

pc_input_buffers_full_avg(source_sptr self) -> pmt_vector_float

source_sptr.pc_noutput_items_avg(source_sptr self) → float
source_sptr.pc_nproduced_avg(source_sptr self) → float
source_sptr.pc_output_buffers_full_avg(source_sptr self, int which) → float

pc_output_buffers_full_avg(source_sptr self) -> pmt_vector_float

source_sptr.pc_throughput_avg(source_sptr self) → float
source_sptr.pc_work_time_avg(source_sptr self) → float
source_sptr.pc_work_time_total(source_sptr self) → float
source_sptr.sample_delay(source_sptr self, int which) → unsigned int
source_sptr.set_min_noutput_items(source_sptr self, int m)
source_sptr.set_thread_priority(source_sptr self, int priority) → int
source_sptr.thread_priority(source_sptr self) → int
gnuradio.audio.sink(int sampling_rate, std::string const device_name, bool ok_to_block=True) → sink_sptr

Creates a sink from an audio device.

Constructor Specific Documentation:

Creates a sink from an audio device at a specified sample_rate. The specific audio device to use can be specified as the device_name parameter. Typical choices are:

  • pulse, hw:0,0, plughw:0,0, surround51, /dev/dsp
Parameters:
  • sampling_rate –
  • device_name –
  • ok_to_block –
sink_sptr.active_thread_priority(sink_sptr self) → int
sink_sptr.declare_sample_delay(sink_sptr self, int which, int delay)

declare_sample_delay(sink_sptr self, unsigned int delay)

sink_sptr.message_subscribers(sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
sink_sptr.min_noutput_items(sink_sptr self) → int
sink_sptr.pc_input_buffers_full_avg(sink_sptr self, int which) → float

pc_input_buffers_full_avg(sink_sptr self) -> pmt_vector_float

sink_sptr.pc_noutput_items_avg(sink_sptr self) → float
sink_sptr.pc_nproduced_avg(sink_sptr self) → float
sink_sptr.pc_output_buffers_full_avg(sink_sptr self, int which) → float

pc_output_buffers_full_avg(sink_sptr self) -> pmt_vector_float

sink_sptr.pc_throughput_avg(sink_sptr self) → float
sink_sptr.pc_work_time_avg(sink_sptr self) → float
sink_sptr.pc_work_time_total(sink_sptr self) → float
sink_sptr.sample_delay(sink_sptr self, int which) → unsigned int
sink_sptr.set_min_noutput_items(sink_sptr self, int m)
sink_sptr.set_thread_priority(sink_sptr self, int priority) → int
sink_sptr.thread_priority(sink_sptr self) → int